800.777.8648

SHELTER SIZE

The standard sizes of the Brandywine are still in the development stage. Please call the sales office at EnWood Structures, 800.777.8648, to discuss your size requirements. Custom sizes are also available.

THE Brandywine PACKAGE COMPONENTS
 

RIDGE BEAM:
Laminated wood ridge beam, #1 grade Southern Yellow Pine, sized as pre design requirements.

WALL DECK:
Pressure treated, two inch (2”) or three inch ( 3”) (nominal sizes) #1 grade, Southern Yellow Pine, tongue and groove, wood decking. Galvanized nails

FASCIA BOARDS:
Pressure treated, 2x6, #1 grade Southern Yellow Pine, fascia board to be attached at the eaves. Galvanized nails to attach the fascia to the beam ends and the deck.

FELT & SHINGLES:
One layer of #30 roofing felt to be applied on top of the wood deck. 25 yr. 3-Tab fiberglass shingles, standard color Autumn Brown, other color options available upon request. Metal roof available and priced upon request.

ROOF PITCH
The front to back pitch of the roofline, and the side roofline pitch is 4/12.

DESIGN LOADS
The typical design load allows for:
12 pounds per square foot dead load
30 pounds per square foot live load
20 pounds per square foot wind load. (Equates to 100 MPH)

There are variables that affect the design sizes of the members, specifically the arches and the ridge beam, and those variables generally include live load conditions that are usually location specific. Building Codes normally dictate the applicable loads to be applied in the member size designs.

PRESSURE PRESERVATIVE TREATMENT
As noted in the component list above, the arches are fabricated with lumber pressure treated prior to gluing with Penta-WR type “C”, at .3 pcf [3 tenths of a pound of preservative per cubic foot of wood] retention.. The wall deck and the fascia boards are also treated with pentachlorophenol, and the .3 pcf retention is used. EnWood utilizes the pentachlorophenol treatment because of its premier qualities and the treatment does not discolor the wood and can be stained or painted.

FOR DETAILED SPECIFICATIONS,
PLEASE CLICK ON THE SPECIFICATION LINK
 

55' x 25'     51' x 32'     55' x 32'

Custom Sizes & Designs Available

Roof Framing - 40' x 26' Brandywine