|
Longitudinal glulam deck designs offer low profile structures which
are typically used for short spans from 16’ to 32’ where clearance
below deck is limited. Designs consist of deck panels spanning from
abutment to abutment. Glulam stiffener beams are used to tie panels
together and to distribute wheel loads.
Stringer & Transverse deck systems utilize a
series of transverse glulam deck panels or solid sawn timbers
supported by straight or slightly curved stringers. Glulam
diaphragms are used for bracing. This system is most economical
for clear spans ranging from 20’ to 80’.
Designs are in accordance with AASHTO
specifications.
EnWood’s bridge team is steeped with expertise
and will assist you with technical advice and assist in writing
the specifications specifically tailored to your project
requirements. In this industry, experience is paramount!
Why an ENWOOD STRUCTURES’ Vehicular Bridge?
-
Aesthetic, creative, and innovative design
capabilities
-
Excellent impact load characteristics
-
High resistance to deicing chemicals
-
On-site assembly efficient and cost effective
-
Full design and engineering assistance by
registered and experienced engineers
-
Over 60 years of experience in manufacturing and
designing bridges
-
Designs specifications, AASHTO
-
AITC seal
|
